Manual

Tape Mode

Tape Mode was designed to impart some of the classic characteristics of

analog tape delays.

Delay time is controlled with the tap switch, and the d time | ratio knob

functions as a ratio control in Tape Mode.

Sub-mode A – Basic Tape Emulation

Sub-mode A provides basic tape emulation. Tape saturation and

compression artifacts are applied to the delayed signal.

Sub-mode B – Vintage Tape Delay

Sub-mode B adds a little bit of ‘wow’ and ‘flutter’ to the delayed signal;

the kind you would associate with an older tape machine that has tape

mechanisms needing replacement. This mode tends to impart the

sound of a subtle chorus.

Sub-mode C – Vintage Tape Delay with Old Tape

Sub-mode C is similar to sub-mode B but with subtle, intermittent

dropouts as one might experience from old, shedding tape and dirty

heads. The repeated signal will also saturate more than normal.