User manual
Controls at a Glance
Power: 9V - 12V DC negative
tip 2.1mm jack. 300mA or greater
Bypass Stompswitch: When the LED is shining, the eect is applied to the
signal. When o, the pedal is being bypassed.
When scrolling through presets, the bypass LED will blink indicating the preset is
ready to load. Press the bypass switch to engage the new preset.
Output: Sets the overall output level(volume) of the pedal.
Depth: Adjusts how wide the eect will modulate.
Special: Modies the eect. Perfroms a dierent function
for each mode. See the cart at the upper left to reference
the funtionality in each mode.
Tone: Changes the tonal charachter of the eect.
Warm will darken the sound.
Clean will leave the signal uneected.
Bright will add some high end.
chorus
mode
special
vibe flanger
a
basic multi w/ trem uni vibrato rotary 60s 70s
regenerationhorncompdepthLF throb regen
b c
a b c
a b c
thru 0