User manual

Using Presets
The Nebulus allows you to save and recall presets. All settings of
the pedal are saved in a preset and each preset is represented by a
different color of the preset LED.
To load a preset, use the preset stompswitch to scroll through
presets. The LEDs will blink, indicating the preset of that color is
ready to load. Press the bypass switch while the LEDs are blinking
to engage the new preset.
To modify a preset, just move a control. The new setting for that
control is instantly stored in the preset. Presets can be locked to
prevent changes from overwriting the preset. see: Advanced
Configuration.
The manual preset is represented by a white LED. It does not store
settings. Instead, it will always use the current settings on the
knobs and switches.