Owner manual

Controls at a Glance
bypass: When the LED is shining,
the eect is applied to the signal.
When o, the fuzz is being
bypassed (true bypass).
treble: controls the amount of
high frequency content in the
output signal. It is a gentle high
shelf lter starting around 3 kHz.
The 12 o’clock setting is 0 dB, no
boost or cut, and the extreme
boost and cut is about 10 dB.
bass: controls the amount of
low frequency content in the
output signal. It is a low shelf
lter starting around 150 Hz. The
12 o’clock setting is 0 dB, no
boost or cut, and the extreme
boost and cut is about 10 dB.