Quick Start Guide
Monitor Modes
Navigate to the Menu and select Monitor Mode. Each option will change how your audio and
cameras are displayed on the monitor.
TIP: When you press the orange Sleep/Wake button, Mila will not display any video or play any audio.
Voice Activated
This mode puts your video display to sleep and wakes your monitor for 20 seconds when noise is detected at the
camera. If two or more cameras are paired, your monitor will wake up to the specic camera that detects noise.
The sensitivity of the camera can be adjusted. Low: If you only want to hear loud screaming or crying,
Medium: If you want to hear babbling and talking, or High: If you want to hear everything from low whispers
to crying.
Audio Only
This mode turns OFF your display and keeps audio playback from your cameras ON. If you have multiple
cameras paired, you’ll only hear audio for the Active camera. In Sequence Mode, audio will cycle through all
paired cameras every 5 seconds.
Always On
This mode keeps your display and audio ON, unless you press the Sleep/Wake button.