User's Manual

*Default configuration: Default setting of channel selection is

“All” to perform auto channel on the exist channel list.

*None: Click “None” to disable the setting on this radio.

This radio is disabled.

*Group Configuration: Click specific groups of channels for

performing auto channel function. For example, users canclickU-NII-

1andU-NII-3toperformautochannelon

these bands; the

mechanism of this AP will select the

relatively optimal channel

to perform wireless service.

Data Rate: Select a data rate from the drop-down list. The data

rate affects throughput of data in the AP. Select the best balance

for you and your network but note that the lower the data rate,

the lower the throughput, though

transmission distance is also

lowered.

RTS/CTS Threshold: Specifies the threshold package size

for

RTC/CTS. A small number causes RTS/CTS packets to be

sent more

often and consumes more bandwidth.

Client Limits: Limits the total number of clients on this radio.

Once setting the ceiling of client numbers, the maximum

Associated client devices will be restricted at this number.

Aggregation: Integrate multiple data packets into one packet

to deliver to client devices. This option reduces the number of

packets, but also increases packet sizes.

AP Detection: AP Detection can select the best channel to

use by

scanning nearby areas for Access Points.

Distance: Specifies the distance between Access Points and client

devices. The proper setting for this parameter

may assist Access

Points to avoid the improper operation

when transmitting data

under afield application.

Save: Click Save to confirm the changes or Cancel to cancel

and

return to previous settings.