Owner`s manual

30816-3-0113Page 6
BUILT-IN FIREPLACE INSTALLATION
Built-In Fireplace Installation
Built-ininstallationofthisreplaceinvolvesinstallingthereplace
intoaframed-inenclosure.Thismakesthefrontofthereplace
ush with a wall. If installing a mantel above the replace, you
must follow the clearances shown in Figure 9. Follow the instruc-
tionsbelowtoinstallthereplaceinthismanner.
Frame in rough opening. Use dimensions show in Figure 1 for a
conventional rough opening. Use dimensions shown in Figure 2
forcornerroughopening.Besuretoprovidegaslineforreplace
andelectricalpowerforoptionalblowerassembly.
1. Attachtwonailingangestoreboxsideswithtwo10x1/2"
screwsforeachnailingange.
2. Gaslineconnectionsmustbemadeatthistime.Whenfacing
the appliance, the gas supply will enter on the right-hand side.
See "Gas Supply" page 11.
3. Insertreplaceintoenclosure.
4. Attachnailingangestoframingwithascrewornail.
5. Finishedwallsurfacewillbeushtotheleadingedgeofre-
place top and sides.
6. Installationofbuilt-inreplaceiscompleted.
Figure 2
Figure 3
Figure 1
Rough Opening for Installing in Wall
Rough Opening for Installing in Corner