Owner`s manual

30816-3-0113 Page 25
The VFD26F(M,P)(3,7) gas control maximum and minimum
inputs are listed below.
OFF is the OFF position.
PILOT is the PILOT position.
VFD26F(M,P)(3,7)
Max. 20,000BTU/HR
Min. 14,000 BTU/HR
VFD26FP3L10 and VFD26FP(30,70)L10
Max. 10,000
Min. N/A
VFD26F(M,P)2 Main Burner Operation
The gas control modulates from a minimum input of 14,000 BTU/
HR("LO"(1)setting)toamaximuminputof20,000BTU/HR("HI"
(5) setting).
Cleaning and Maintenance / Main Burner
WARNING
Turnoffheaterandletcoolbeforecleaning.
CAUTION
You must keep control areas, burner and circulating air
passageways of heater clean. Inspect these areas of heater
before eachuse. Haveheater inspected yearly by aqualied
serviceperson.Heatermayneedmorefrequentcleaningdueto
excessivelintfromcarpeting,beddingmaterials,etc.
Logs
Be careful cleaning and handling logs so as not to damage them.
Iflogsbreakorfallapartinhandling,spraythebrokenpiecesand
berswithwater,sweepupanddiscard.
MAIN BURNER AND THERMOSTAT OPERATION