Owner`s manual

30816-3-0113Page 16
LOG PLACEMENT
 1. Placefrontlogs(#1and#2)betweenfrontgrateangeand
mainburner.Alignnotchesonfrontlogswithlocatortabsin
base.
 2. Placemiddlelog(#3)betweenfrontandrearloopofburner.
NOTICE:Donotplacelogontopofpilotassembly.
 3. Placerearlog(#4)onrearlogshelf.Bottomangeoflogmust
beplacedbetweenthelogshelfandburnertube.
4. This step is optional for VFD26FP3L10 log sets. Place front
twig(#5)onto(#1)logandatareaon(#3)log.Thebottom
ofthefronttwigistobeplacedbehindthegratetangthatis
second from the left.
Attention: Do not use Figures 12 and 13 to order logs. Refer to
Pages 34 to 35, Parts list and Page 36, Parts View to order logs.
Refer to Figure 12 for the following warning.
CAUTION
Failure to position the parts in accordance with this diagram or
failure to use only partsspecically approvedwith thisheater
may result in property damage or personal injury.
Figure 12
1
4
5
3
2
Figure 13