Owner`s manual

30816-3-0113 Page 15
OUTER TRIM INSTRUCTIONS
1. Remove upper louver, grasp louver at left and right ends; lift and pull forward.
2. Openbottomlouver,thenlifttoremove.
3. Installtherightframeandleftframetothereplace.Alignclearanceholesinframewithscrewholesinreplace.Attachrightframe
andleftframetoreplace.Usetwo8x1/2”Phillipsscrewsforeachframe.
4. Inserttopframeintointerior,topofreplace.Alignclearanceholesintopframewithscrewholesinreplace.Attachtopframeto
replace.Usetwo8x1/2”Phillipsscrewsfortopframe.
5. Replacebottomlouver.
6. Replace top louver.
3-PIECE FRAME KIT
SIDE TRIM
HOOD INSTRUCTIONS
1. Remove upper louver, grasp louver at left and right ends; lift and pull forward.
2. Removescreenframeassembly.
3. Outertrimmustbeinstalledbeforeinstallinghood.
4. Placethetophoodangeontopoftherebox,theninstallonescrew(A)atthecenteronventfreereplacethroughthereboxtop
frombelow.
5. Install one screw (B) at each end of the hood as shown.
6. Replace upper louver.
7. Replacescreenframeassembly.
CAUTION
Ahoodmustbeinstalledpriortooperationofappliance.