Owner's Manual

ManualsBrandsEmpire ManualsPaintballVanquish v2.0

Game Timer minutes (00-99)

• Press CENTER of D-Pad to save minutes setting

• Press UP or DOWN to increase/decrease the

Game Timer seconds (00-59)

• Press CENTER of D-Pad to save seconds setting

• Press LEFT or Press CENTER of D-Pad to save settings and return to

SYSTEM Menu

Timer Alarm - An audible alarm sounds with 1 minute left and continuously

after the timer has expired.

• Press RIGHT or Press CENTER of D-Pad to change the setting from On or

OFF

• Press UP or DOWN to cycle through ON or OFF (default is ON)

• Press LEFT or Press CENTER of D-Pad to save the setting and return to

SYSTEM Menu

Trigger CMD - After holding the trigger for 1 second while the

marker is Live, Trigger Command allows the marker to perform a

function, either Force Shot, or Toggle the Eyes On or Off, or both.

A Force Shot is when the marker will cycle once with the Eyes ON

even though there is no ball in the breech. This is to allow sound

activated loaders to begin loading. The Trigger Command may

also be set to OFF which will not perform any function when the

trigger is held for 1 second.

• The screen displays the current setting of the Trigger Command

• Press RIGHT or Press CENTER of D-Pad to change the Trigger

Command (either OFF, TOGGLE, FORCE or BOTH)

• Press UP or DOWN to cycle through ON or OFF (default is

BOTH)

• Press LEFT or Press CENTER of D-Pad to save setting and

return to SYSTEM menu

Dwell Lock - When selected ON, changing the Dwell Setting in any of the 3 user conﬁgura-

tions (C1, C2, C3) will change the dwell for all 3 conﬁgurations. When OFF, the dwell in each

user conﬁguration can be changed independently.

• The screen displays the current setting of either ON or OFF

• Press RIGHT or Press CENTER of D-Pad to change the Dwell Lock setting (default is ON)

• Press UP or DOWN to cycle through ON or OFF

• Press LEFT or Press CENTER of D-Pad to save the setting and return to SYSTEM Menu

Brightness - Adjustable the brightness of the screen display when

screen is not dimmed

• The screen displays the current setting of the Brightness setting

(A numerical value of 10%-100%, where 100% is the brightest

setting)

• Press RIGHT or Press CENTER of D-Pad to change the Bright

ness setting (default is 50%)

• Press UP or DOWN to increase/decrease the Brightness setting

(10-100)

• Press LEFT or Press CENTER of D-Pad to save the setting and

return to SYSTEM Menu

Dim Time - The elapsed time after the last joystick activation in

which the screen will dim to save power.

• The screen displays the current Dim Time setting (in seconds)

• Press RIGHT or Press CENTER of D-Pad to change the Dim Time

setting (default is 10 sec)

• Press UP or DOWN to increase/decrease the setting (5-60 sec, in 5 sec intervals)

• Press LEFT or Press CENTER of D-Pad to save setting and return to SYSTEM menu

Auto Off – The elapsed time after the last trigger activation in

which marker will shut off to save power.

• The screen displays the current Auto Off setting (in minutes)

• Press RIGHT or Press CENTER of D-Pad to change the Auto Off

time (default is 10 min)

• Press UP or DOWN to increase/decrease the Auto Off setting

(5-60min, in 5 minute intervals)

• Press LEFT or Press CENTER of D-Pad to save setting and

return to SYSTEM menu

Custom Boot – This setting allows the user to turn the use of the

custom boot screen graphics on/off. Custom boot screens can be

made and downloaded using the Vanquish Boot Screen Editor and

the Vanquish USB Tool software. These applications are included with the Vanquish on disc