Owner's Manual

14
Anti-Bolt Stick (ABS) Dwell - Time that the dwell is increased by
for the first shot when ABS is activated. Too high of a setting may
cause first shot of a string to have high velocity. Too low of a set-
ting may cause excessive bolt stick or first shot drop off.
• The screen displays the current ABS Dwell Time (in millisec
onds)
• Press RIGHT or Press CENTER of D-Pad to change the ABS
DWELL setting (default is 15ms)
• Press UP or DOWN to increase/decrease the ABS Dwell setting
(0-50 ms)
• Press LEFT or Press CENTER of D-Pad to save setting and
return to CONFIG menu
Ramp Start - Number of Semi-Auto shots needed before selected
firing mode kicks in (affects all firing modes but Semi-Auto and NPPL).
• The screen displays the current Ramp Start setting (in # of shots)
• Press RIGHT or Press CENTER of D-Pad to change the Ramp Start setting (default is 3
shots)
• Press UP or DOWN to increase/decrease the Ramp Start setting (3-12 shots)
• Press LEFT or Press CENTER of D-Pad to save setting and return to CONFIG menu
Ramp Sustain - Trigger Pulls per Second (TPS) that must be
maintained to continue ramping (affects RAMP, PSPR and MILL
modes).
• The screen displays the current Ramp Sustain setting (in trigger
pulls per second)
• Press RIGHT or Press CENTER of D-Pad to see current Ramp
Sustain setting (default is 3)
• Press UP or DOWN to increase/decrease the Ramp Sustain set
ting (3-12 TPS)
• Press LEFT or Press CENTER of D-Pad to save setting and
return to CONFIG menu
Ramp Reset - Time after the last trigger pull before Ramp Start
Shot count will reset (affects all modes except Semi and NPPL).
• The screen displays the current Ramp Reset (in seconds)
• Press RIGHT or Press CENTER of D-Pad to change the Ramp Reset setting (default is 1.0)
• Press UP or DOWN to increase/decrease the Ramp Reset setting
(0-1.0 sec in 0.1s increments)
• Press LEFT or Press CENTER of D-Pad to save setting and return to CONFIG menu
Burst Shots - Determines how many shots are fired at each trigger
pull when marker firing mode is BURST or PSP B. This setting will
only affect BURST and PSP B firing modes.
• The screen displays the current Burst Shots setting (in # of
shots)
• Press RIGHT or Press CENTER of D-Pad to change the Burst
Shots setting (default is 3 shots)
• Press UP or DOWN to increase/decrease the Burst Shot setting
(2-6 shots)
• Press LEFT or Press CENTER of D-Pad to save setting and return
to CONFIG menu
Back – Return to MAIN Menu
• Press RIGHT or Press CENTER of D-Pad when BACK is visible to
return to the MAIN Menu.
SYSTEM MENU
Settings under this menu affect secondary functions of the marker that do not have to do with
firing characteristics.
Navigating the System Menu
• Press the D-pad in the UP or DOWN directions to scroll through the SYSTEM
Menu options. The current setting for each option will be
displayed on the right side of screen.
• To select a setting for modification press the D-Pad RIGHT or CENTER.
• Tilt the D-Pad UP or DOWN to modify the setting value.
• Tilt the D-Pad LEFT or press CENTER to save the setting and go back to the
System Menu.
Game Timer - Set the Game Timer countdown duration.
• The screen displays the current Game Timer duration - MM = Minutes, SS =
Seconds (MM:SS)
• Press the D-Pad Right or Center to change the duration time (default 7:10)
• Press UP or DOWN to increase/decrease the