Owner`s manual
32084-3-0813Page 38
MAINTENANCE & SERVICE
RECOMMENDED MAINTENANCE
MAINTENANCE ITEM
FREQUENCY OF MAINTENANCE
MONTHLY BY HOME-
OWNER
ANNUALLY BY
SERVICE PERSON
Verify the area is free from combustible materials. See clearances on
page 17.
X X
Verify the combustion and ventilation air is not restricted. X X
Verify the ue and inlet pipes do not have any cracks or holes. X
Verify burner ame. X
Clean the blower compartment X
Clean the burner. X
Verify the condensate system is clean and leak free. X
Clean the Filter X X
Winterization
As Needed (determined by
weather)
The UltraSaver should be inspected and serviced annually by a qualied service person. This will ensure that the wall furnace is operating
safely and efciently. Should you suspect any abnormal operation, contact a service person that has been trained to service this product.
Maintenance for the Homeowner
Removing the Front Panel
It may become necessary to remove the front panel of the appli-
ance to remove dropped or fallen objects.
Remove the front panel by lifting up then pulling out. Replace the
panel by reversing this step.
WARNING
FOR YOUR SAFETY, TURN OFF POWER TO APPLIANCE.
WARNING
Do not operate this appliance without the front panel.
Cleaning the Filter
The lter is located on the back of the wall furnace. To clean the
lter, rst open the lter cover on the back of the wall furnace. See
Figure 60.
Figure 60
Next, remove the lter from the wall furnace by lifting it up and out.
See Figure 61.
Figure 61
The lter may be rinsed with water or blown clean with compressed
air. Allow the lter to dry completely before reinstalling it.