Owner`s manual

32084-3-0813 Page 33
This appliance is equipped with a three-prong grounding
plug and should be plugged directly into a properly grounded
three-prong receptacle. Do not cut or remove the grounding
prong from this plug. For an ungrounded receptacle purchase
an adapter which has two prongs and a wire for grounding.
Proper line voltage polarity must be maintained in order for the
control system to operate correctly. Verify the incoming neutral line
is connected to the white wire and the incoming “hot” line is con-
nected to the black wire. The wall furnace will not operate properly
unless the polarity and ground are correct.
Figure 52
WARNING
Potential risk of re, electric shock, and personal
injury. Take precautions to reduce such risks.
CAUTION
Label all wires prior to disconnection when servicing
controls. Wiring errors can cause improper and
dangerous operation. Verify proper operation after servic-
ing.
WIRING
WALL FURNACE INSTALLATION