Operation Manual

30
EA470
4-CHANNEL FULL RANGE DIGITAL AMPLIFIER
62Wrms x 4 @ 4 ohms (> 0.1% THD / 13.8V)
88Wrms x 4 @ 2 ohms (> 0.3% THD / 13.8V)
195Wrms x 2 @ 4 ohms (> 0.3% THD / 13.8V)
2 ohms stable stereo mode / 4 ohms stable bridged mode
Full-MOSFET amplification circuitry
Integrated highpass & bandpass filtering control, 30 – 300Hz with 18dB/oct.
Variable input sensitivity: 0.3 – 7V
Damping factor @ 4 ohms: < 350
Signal to noise ratio: < 100dB
Channel separation: < 50dB
25mm
2
direct power input terminals
Dimensions WxHxD: 355 x 50 x 275mm
Net weight: 4.70kg
EA1250
FULL-MOSFET MONO AMPLIFIER
260Wrms x 1 @ 4 ohms (> 0.1% THD / 13.8V)
450Wrms x 1 @ 2 ohms (> 0.3% THD / 13.8V)
590Wrms x 1 @ 1 ohms (> 0.3% THD / 13.8V)
1 ohms stable
Full MOS-FET amplification circuitry
Integrated highpass & lowpass filtering control, 30 – 300Hz with 18dB/oct.
Variable input sensitivity: 0.3 – 7V
Damping factor @ 4 ohms: < 350
Signal to noise ratio: < 100dB
Remote low pass level remote control
25mm
2
direct power input terminals
Dimensions WxHxD: 355 x 50 x 275mm
Net weight: 4.96kg
EM 2/4-CH Manual 2003 02.06.2003 17:40 Uhr Seite 30