Manualshelf

Owner Manual

ManualsBrandsEmpava ManualsAppliances2 Piece Kitchen Package With 30" Induction Cooktop & 30" Ducted Under Cabinet Range Hood
12345678910
Baffle Installation Side View
Step 10: Install baffle filters
Install baffle filters; refer to picture at left for the following three steps:
1.Angle baffle filter toward back of hood.
2.Lift a baffle filter up above horizontal level.
3.Slide forward into slot behind the front of hood.
4.Slide the installed baffle filter to either left or right until it stops.
5.Repeat step 1 to 4 to install the next ones, make sure you slide to opposite direction from
the previous installed filter.
To remove the baffle, please reverse the process.
NOTE: The middle filter has to be installed last where it should be taken out first when you
want to remove other filters.
STEP 9: INSTALL OIL TUNNEL OR OIL CONTAINER (NOT AVAILABLE FOR ALL MODELS)
Drop oil tunnel into recess support near rear of hood. Refer to the left picture
Oil Tunnel
Side View