Free-Standing Bathtub Installation Instructions Model # EMPV-59FT002 Distributed by Empava Appliances Inc. 15253 Don Julian Rd, City of Industry, CA 91745 United States www.empava.
Contents 1. Product Drawing ................................................................................ 3 2. Installation Steps ................................................................................ 4 3. Cleaning and maintenance tips .......................................................... 4 4. Caution ..............................................................................................
1. Product Drawing Hot water switch Hot/Cold water switch Cold water switch Drainer Water fall faucet Hand shower Remark: acrylic bathtub is a kind of plastic products, physical objects and dimensional drawing may have ±20mm of deviation.
2. Installation Steps 2-1. Remove the Bath from the carton. Ensure the Bath does not come into contact with rough surfaces. Rough surfaces will scratch your Bath. Always ensure that the Bath is placed on cardboard or carpets during installation. Place the Bath in position for installation. 2-2. Adjust the feet make sure the Bath is level. Only if the Bath is level will all water drain to the waste outlet. Please ensure legs are adjusted in line with the base of bath. Check the sits flat. 2-3.
water quality in high calcium content, after a long time will form macular at the bottom of the tub wall and faucet. 3-2. Cleaning method. Use soft cloth with neutral detergent or soap water. 3-3. Some attentions. It is strictly prohibited to use sharp objects or hard clean tool friction bath, in order to avoid scratch the bath surface, away from open flame, high temperature bulb, cigarette butts etc.
