Use and Care Manual

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
30. The bearing of the water pumps may get stuck after this SPA hasn’t been used for a long time, so the
water pumps may not working when pressing the water-pump buttons on control panel. If the water pump
not working because of water bearing get stuck, then you can notice that no water current through jets or no
suction- force in the skimmer. Please shut down the power ,open the hem doors, find out the water pumps,
rotate the blade inside water pumps, turn on the power again, activate the water pumps by pressing the
water-pump buttons several times.
31. Sometimes, the water pumps may work or rotate slowly at the beginning and back to normal after
working 2-3 seconds. If the water pumps still rotate slowly after 2-3 seconds, please press the water-pump
buttons on panel to re-activate the pumps.
32. When you notice the hum of the water pumps while pumps not working (no water current through jets)
and overheating water pump surface, please shut down power immediately. It results from air kept inside of
water pumps or pipes be block. Please check the water pumps and pipes, fix the problem , and turn on the
power again.
33. During installation of the SPA, please keep the whole construction area clean and clear .No mud or
metal be left beneath the SPA tub body or near the water pumps. Keep sufficient space for dissipating heat
of the working water pumps.
I. USA BALBOA System Instructions
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2014 Balboa Water Group.
CNBP501X Tech Sheet
Part Number: 56849-02
56850-02
5.5kW 800 Incoloy
4.0kW 800 Incoloy
Custom Box Overlay □
Box Overlay Part Number N/A
UL System Model 5.5kW: BP501-CNBP501X-BU
UL System Model 4.0kW: BP501-CNBP501X-BS
Software Version ID:
Software Version:
File Name:
M100_201 V36.0
36.0
BP501_36.0_CNBP501X_3X15A.hex
Configuration Signature: 890194AA
Eng. Project Number: 4817
Control Panels (See later pages for more information):
spaTouch™2
Icon spaTouch™
Menued spaTouch™
TP800
TP600
TP400T US
TP400W US
Any version (version 2.0 or later required for bba™2 fully integrated functionality)
Any version (version 3.36 or later required for bba™2 fully integrated functionality)
Any version* (version 2.8 or later required for bba™2 integrated functionality)
Version 3.1* and later (Version 3.13 or later required for bba™; version 4.11 or later required for bba™2 integrated functionality)
Version 2.7* and later
Version 2.7* and later (TP400T CE may be used)
Version 2.7* and later (TP400W CE may be used)
* TP600/TP400T/TP400W version 2.14 or later required for new reminders to display correctly.
TP800 version 4.2 or later (or Menued spaTouch™ version 2.2 or later) required for new reminders to display correctly.
Template 56377 10-05-12
56849-02_56850-02_97_A 11-22-16
2