Use and Care Manual

Cook Top Safety Guidelines
Surface Burner Ignition
To light the top burners, push and turn the appropriate control knob counter clockwise to the “HI”
position. You will hear a clicking noise – the sound of the electric spark igniting the burner. Once
burner ignition has been achieved, then turn the burner control knob to adjust the desired heat
setting.
NOTE: When one burner is turned to the “HI” position, the burner igniters will park. Do not
attempt to disassemble or clean around any burner while another burner is on. Do not touch any
burner cap, burner base, or igniter while the igniters are sparking.
Simmer and Boil
A smaller flame will give the best simmer results. Small flames offer precise cooking performance
for delicate foods, keeping food warm, melting chocolate or butter, and for cooking that need to
cook over low heat for a long time.
2The highest flame settings provides the maximum heat that is available on your range. This setting
should be used for heavy cooking loads such as water boiling or pasta cooking.
Flame Size
When you select the flame size, watch the flame when you turn the knob.
Any flame larger than the bottom of the cookware is wasted.The flame should be steady and blue in
color. Foreign material in the gas line may cause an orange flame during initial operation.
26