Specifications

Tower Speaker Outrigger Installation
Use these attractive, tower speaker outriggers for the Impression Series tower speakers to
create a wider support base for the cabinet. ese outriggers make your tower speakers
more stable, and are ideal when placing them on a thickly carpeted oor.
Package contents include:
1 each small outriggers for back of cabinet
1 each large outriggers for front of cabinet
4 metal spike feet
4 metal rubber cone feet
4 each top cap nuts
4 each threaded adjustment washers
4 each machine screws
e metal spike feet work best on carpeted
surfaces. The rubber cone feet have been
included for use with wooden or tiled oors.
Attach the tower speaker outrigger plates to
the bottom of the speaker with the machine
screws provided, as shown in gure 2 below. e larger plate should be at the front of
the speaker and the smaller plate at the back of the speaker.
NOTE: To prevent scratching or damaging of the cabinet, turn the tower upside down
on a so surface when attaching the outrigger feet.
Attach the metal spike or rubber cone feet using the top cap nuts as shown in gure 1.
Adjust the level/height using the adjustment washer above the metal spike or rubber
cone feet.
Impression Series 8 Owner’s Manual