Specifications
6. Line Inputs: Line level input should only be used if no subwoofer crossover is being
utilized through the receivers bass management.
7. LFE In: Line level input is used to connect to most receivers or processors. e “LFE”
output of receiver and may be called “subout”.
8. Fuse Access: is is the power fuse access.
WARNING! In the event the fuse must be replaced, the replacement fuse must
match exactly the original fuse value. If the replacement fuse is not of the same
value, damage to the Subwoofer Amplier may result.
CAUTION! Before replacing the fuse, disconnect the power cord from the
power receptacle.
9. Power: Power on and o switch.
6
Subwoofer Amplier Controls and Setup (continued)
Subwoofer Amplier Diagram.