User manual

Dear Customer,
congratulations on the purchase of the EMP-Centauri product. Before its installation and putting
into operation, read carefully the entire operation manual. Keep the purchase and rework (if any)
records for future need.
Content
1 Field of Application, Warranty 1
2 Technical Specifications 1
3 Product Takeover 3
4 Product Storing and Installations 3
5 Product Connection 3
6 Product Settings 4
7 Safety 4
8 Product Maintenance 5
9 Troubleshooting 5
10 Symbols Explanation 6
11 Wiring Diagrams 6
12 EMP-Centauri Related Products 7
13 Contact 8
1 Field of Application, Warranty
The product is designed for the distribution of satellite (SAT), terrestrial (TERR); TV and radio
signals. We recommend the device to be installed and serviced by the qualified technician.
EMP-Centauri's PROFI CLASS products are covered under 4 (four) years warranty from the
date of purchase. The warranty shall not apply to the product used for other than the specified
purpose. The user will be responsible for injury or material damage which may arise in
consequence of any product use in contradiction with the manual. It is prohibited to dismantle
the product and make any interventions in it. Repairs or any interventions in the product may be
performed only by EMP-Centauri company, or other companies authorized by EMP-Centauri.
2 Technical Specifications
The products are standalone multiswitches for distribution of terrestrial and satellite signals from
1 satellite position (4 polarities) for 4 (MS5/4PIU-4), 6 (MS5/6PIU-4), 8 (MS5/8PIU-4), 12
(MS5/12PIU-5) or 16 (MS5/16PIU-5) users. Multiswitches are controlled from receiver by
analogue commands. It is enabled to switch on active or passive mode of terrestrial band.
Multiswitches are compatible with quad LNB. Terrestrial input can supply terrestrial antenna
preamplifier with DC voltage, the supply is electronically protected against short-circuit.
Multiswitches are powered from internal power supply P1U27.
standalone Unicable
TM
multiswitches for
distribution of satellite
signals from 1 satellite
position (4 polarities) for
8 users
standalone Unicable
TM
multiswitch for
distribution of satellite
signals from 2 satellite
positions (8 polarities)
for 8 users
Instruction Manual 1/003030 B
MS5/4PIU-4
MS5/6PIU-4
MS5/8PIU-4
MS5/12PIU-5
MS5/16PIU-5
13 Contact
EMP-Centauri s.r.o.
5. kvetna 690
339 01 Klatovy 4
Czech Republic
tel: [phone]
fax: [phone]
[e-mail]
www.emp-centauri.eu
1 z 8
8 z 8