Specifications
Page 10
Listener
Typical near-eld monitor placement
Speaker Placement
Speaker placement is often a compromise between optimum performance, personal preference,
and site requirements. The following guidelines will serve as a starting point to help you decide
where to place your airmotiv™ 5s powered monitors to achieve the best possible performance.
Positioning your airmotiv™ 5s monitors as near-eld monitors
The Emotiva airmotiv 5s was designed primarily as a superlative near-eld monitor. When
choosing optimum locations for near-eld monitors, the goal is to locate them close to the
recording console, and far from any walls or other reective surfaces, to maximize direct sound
while minimizing reected sound.
• Mount your airmotiv 5s powered monitors on separate stands, or mounts, if possible. If you
place them directly on the meter bridge or the same table as your console, vibrations may
be coupled to the console. You should consider using a decoupling platform beneath each
monitor. Mounting points for brackets are provided on the bottom surface of each monitor.
• Locate your monitors close to the recording console, and away from walls or other
large reective surfaces. If there are large reective surfaces nearby, covering them with
commercial sound absorbing materials (or felt, or a tapestry) may improve frequency
response and imaging.