User's Manual
16 eMotimo spectrum Instructions R007
The spectrum st4 is all about the feel.
Before moving motors, visit settings menu and select your slider:
Live Motion - Motor Preset (Feel)
Unlike our previous products and most other motion control on the market, the spectrum has
outstanding live control through the remote. Because of this, we can live drive the head around for
single pass with fewer jitters or unwanted movements that can show up with manual control. As you
start to record moves, it becomes very important to tune your head for live control before you press
the record button.
Power on the unit and select the rst menu setting (Live Motion). Now you are on a motor presets
page that allows you to drive the head around and experiment with some predened motor move
proles. Important Note –motor preset selection will restore after a power cycle.
On this page, use the Up/Down DPad or NavStick to select a motor move prole. The names and
general parameters for relative speeds and accelerations are shown, listed from 1-9. There are some
motor proles that are slow, some that are fast, some that are nearly silent, and some are super
damped. Some are specically meant for angled slider shots where power to lift a load is required.
Play around and nd what works for you with your camera/lens style combination.
*If you’re using Dynamic Perceptions, Rhino, or Kessler slider, please select iFootage slider.