User's Manual
10 eMotimo spectrum Instructions R007
Powering spectrum ST4
Powering your spectrum ST4 is easy. You can use many o the shelf AC adapters and batteries.
A 12V or 24V US AC adapter is included with most orders by default. The spectrum ST4 must be
powered within the following specications:
• Voltage – 10-24VDC.
• Current - Minimum 2Amps. 3.5A preferred.
• Connector for power port: 2.1mm x 5.5mm circular barrel connector – center positive.
Warning Powering the spectrum for motor moves from any USB port is not supported.
V-Mount upgrade option
With the V-Mount upgrade, your spectrum ST4 will power on anytime you engage the battery. We are
oering this upgrade with an IDX plate model P-V2. It includes a DTAP power port that allows you to
power your camera from a single battery too!