Installation Guide

Recommended Care & Maintenance
Do
 Clean frequently by thoroughly rinsing with a mild soap and warm water then wipe dry.
 Wipe gently with a soft cloth in the direction of grain lines routinely for preventative cleaning.
 Keep sink free of any standing water as this can cause a buildup of mineral deposit, which can
affect the appearance of sink.
 Any stains should be removed by scrubbing in the direction of the grain with a mild abrasive
such as Comet.
 Always rinse sink after using any cleaning agent and wipe dry.
 Clean any mineral deposits built up over time with a mild solution of vinegar and water followed
by a thorough flush with water.
 NOT RECOMMENDED FOR MIRROR FINISH.
 Extract any scratches with a Scotch-brite pad and cleaning agent rubbing in the direction of the
grain.
Don’t
 Leave water spots, steel cookware or utensils in sink for lengthy periods; iron particles often
develop rust spots on surface.
 Use a steel wool or scoring pad as it damages the sink surface and causes discoloration.
 Let household cleaning agents or bleach sit in your sink for a long period of time as this may ruin
the finish of your sink
 Leave rubber mats, sponges, or cleaning pads in sink for a long period of time as this may ruin
the finish of your sink.
 Use the inside of the sink as cutting surface.
 Use any cleaning products containing sulfuric acid or hydrochloric acid as this will attack the
sink. Silver cleaners can also contain acids that will damage sink surface.
4