Installation Guide
Instructions for Farmhouse Apron Sink Installation 
Before Installation: 
Read installation and maintenance instructions prior to installation. Inspect your sink for any 
noticeable damage before installation. Examine all local applicable plumbing and building codes. 
Instructions are based on application to composite material or solid surface countertop installation 
only; other countertop applications such as stone, marble, granite or butcher-block should be left to 
experienced countertop fabricator for custom installation. 
Ariel Farmhouse series sinks are hand-crafted and it is suggested to use experienced installers for the 
sink installation. For custom cutting of countertop and installation of sink, on-site installation is 
recommended. Acceptable variances are approximately 1/2 inch. Alignment to cut-out and precise 
application and trimming of any adhesive sealant are important to the ideal fit and finished look of the 
sink. Please be cautious in this regard. 
Ariel Farmhouse series sinks require custom order cabinets. Consult your cabinet dealer. 
Ariel does not accept any liability for damage to countertop, sink fixture, faucets or personal injury 
during the installation process. Warranty is void if installation instructions are not followed. 
Required Tools and Materials: 
  Measuring Tape 
  Denatured Alcohol 
  Wood Brackets 
  Pencil (Avoid ink) 
  Ear Plugs/ Earmuffs 
  Carpenter Square 
  Silicone Adhesive Sealant 
  Safety Glasses 
  Contractor Shims 
  Rags 
  Hacksaw/Jigsaw 
 1 





