Datasheet
Document Title：Product Specification of Ni-MH6XE&：
5、CONFIGURATION, DIMENSIONS AND MARKINGS
Please refer to the attached drawing.
6、EXTERNAL APPEARANCE
The cell/battery shall be free from cracks, scars, breakage, rust, discoloration, leakage or deformation.
7、WARRANTY
One year limited warranty against workmanship and material defects.
8、CAUTION
[1]Reverse charging is not acceptable.
[2]Charge before use. The cells/batteries are delivered in an uncharged state.
[3]Do not charge/discharge with more than our specified current.
[4]Do not short circuit the cell/battery Permanent damage to the cells/batteries may result.
[5]Do not incinerate or mutilate the cells/batteries.
[6]Do not solder directly to the cells/batteries.
[7]The expected life may be reduced if the cells/batteries are subjected to adverse conditions as:
extreme temperature, deep cycling, excessive overcharge/ over-discharge.
[8]Store the cells/batteries in a cool dry place. Always discharge batteries before packing.
Notes：
[1] T
1
: Ambient Temperature.
[2] Approximate charge time from discharged state, for reference only.
[3] IEC61951-2(2003)7.4.1.1 Cycle Life:
Cycle No.
Rest
1
None
2-48
None
49
None
50 1-4h
0.2C to 1.0V/cell
0.25C×3h10min
0.1C×16h
Cycle l to 50 shall be repeated until the discharge duration on any
50th cycle becomes less than 3 h.
0.25C to 1.0V/cell
Charge Discharge
0.1C×16h
0.25C×3h10min
0.25C×2h20min
0.25C×2h20min