Datasheet

Model: EMMERICH NIMH AKKU D 5000 MAH FT-1Z (255045)
Chemical System: Nickel Metal Hydride Ni-MH
Type D
Flat Top
Nominal Voltage Standard
1,2 V
Nominal Capacity Low Rate - 0.1C
5000 mAh
Weight
120 g
Capacity Charge Discharge Minimum Typical
Low Rate - 0.1C
0.1C 0.2C 5000 mAh 5150 mAh
High Rate - 1C
0.1C 1C 4400 mAh 4600 mAh
Charging Standard Quick* Fast*
Minimum Charge
500 mA (0.1C) 500 mA (0.1C) 500 mA (0.1C)
Time Required (hrs)
16 hrs 16 hrs 16 hrs
Maximum Charge
1000 mA (0.2C) 2500 mA (0.5C) 5000 mA (1C)
Time Required (hrs)
< 8 hrs < 2.2 hrs < 66 min (or - Delta V)
Minimum Overcharge
500 mA (0.1C)
Maximum Overcharge
10000 mA with cut-off control
Maximum Discharge Current Continuous
25 A
Momentary (1 second )
75 A
Internal Impedance Typical at 1000Hz
12 milliohms upon fully charged
Temperature Storage for < 1 Month (deg.C) Storage for < 1 Year (deg.C)
Minimum
-20 -10
Maximum
40 30
Discharge (deg.C) Charge (deg.C)
Minimum
-20 0
Maximum
50 45
Service Life Standard (IEC61951-2)
upto 500 cycles (for reference)
Designations IEC 61951-2
*
Quick and Fast charge require cut-off control circuitry to terminate charge or switch to trickle charge when cell reaches full charge
Remark: The information contained herein is presented only as a guide for the applications of our products
Data in this specification are subjected to change without notice and become contractual only
after written confirmation by Emmerich.
D 32,5 ± 0.5
C 10,0 ± 0.3
H 59,5 ± 0.5
H1 0,3 (REF)
Dimensions (mm)
Specification for Sealed Rechargeable Nickel Metal Hydride Battery
H
H
1
D
C
Charge: 500mA x 16hrs at 20deg.C
Charge: 500mA x 16hrs at 20deg.C
2500mA
(0.5C)
1000mA
(0.2C)
500mA
(0.1C)
15A
(3C)
10A
(2C)
5A
(1C)