Datasheet

Model: EMMERICH NIMH AKKU 2/3 A 1100 MAH FT-1Z (255032)
Chemical System: Nickel Metal Hydride Ni-MH
Type 2/3A
Flat Top
Nominal Voltage Standard
1,2 V
Nominal Capacity Low Rate - 0.1C
1100 mAh
Weight
21 g
Capacity Charge Discharge Minimum Typical
Low Rate - 0.1C
0.1C 0.2C 1100 mAh 1130 mAh
High Rate - 1C
0.1C 1C 968 mAh 1010 mAh
Charging Standard Quick* Fast*
Minimum Charge
110 mA (0.1C) 110 mA (0.1C) 110 mA (0.1C)
Time Required (hrs)
16 hrs 16 hrs 16 hrs
Maximum Charge
220 mA (0.2C) 550 mA (0.5C) 1100 mA (1C)
Time Required (hrs)
< 8 hrs < 2.2 hrs < 66 min (or - Delta V)
Minimum Overcharge
110 mA (0.1C)
Maximum Overcharge
2200 mA with cut-off control
Maximum Discharge Current Continuous
3,3 A
Momentary (1 second )
11 A
Internal Impedance Typical at 1000Hz
35 milliohms upon fully charged
Temperature Storage for < 1 Month (deg.C) Storage for < 1 Year (deg.C)
Minimum
-20 -10
Maximum
40 30
Discharge (deg.C) Charge (deg.C)
Minimum
-20 0
Maximum
50 45
Service Life Standard (IEC61951-2)
upto 500 cycles (for reference)
Designations IEC 61951-2
*
Quick and Fast charge require cut-off control circuitry to terminate charge or switch to trickle charge when cell reaches full charge
Remark: The information contained herein is presented only as a guide for the applications of our products
Data in this specification are subjected to change without notice and become contractual only
after written confirmation by Emmerich.
D 16,5 ± 0.5
C 8,0 ± 0.3
H 28,0 ± 0.5
H1 0,3 (REF)
Dimensions (mm)
Specification for Sealed Rechargeable Nickel Metal Hydride Battery
H
H
1
D
C