Datasheet

Model:
Chemical System: Nickel Metal Hydride Ni-MH
Type 2/3AA
Flat Top
Nominal Voltage Standard
1,2 V
Nominal Capacity Low Rate - 0.1C
600 mAh
Weight
14 g
Capacity Charge Discharge Minimum Typical
Low Rate - 0.1C
0.1C 0.2C 600 mAh 630 mAh
High Rate - 1C
0.1C 1C 528 mAh 550 mAh
Charging Standard Quick* Fast*
Minimum Charge
60 mA (0.1C) 60 mA (0.1C) 60 mA (0.1C)
Time Required (hrs)
16 hrs 16 hrs 16 hrs
Maximum Charge
120 mA (0.2C) 300 mA (0.5C) 600 mA (1C)
Time Required (hrs)
< 8 hrs < 2.2 hrs < 66 min (or - Delta V)
Minimum Overcharge
60 mA (0.1C)
Maximum Overcharge
1200 mA with cut-off control
Maximum Discharge Current Continuous
1,8 A
Momentary (1 second )
6 A
Internal Impedance Typical at 1000Hz
45 milliohms upon fully charged
Temperature
Storage for < 1 Month () Storage for < 1 Year ()
Minimum
-20 -10
Maximum
40 30
Discharge () Charge ()
Minimum
-20 0
Maximum
50 45
Service Life Standard (IEC61951-2)
upto 500 cycles (for reference)
Designations IEC 61951-2
*
Quick and Fast charge require cut-off control circuitry to terminate charge or switch to trickle charge when cell reaches full charge
Remark: The information contained herein is presented only as a guide for the applications of our products
Data in this specification are subjected to change without notice and become contractual only
after written confirmation by Emmerich.
D 14,0 ± 0.5
C 8,0 ± 0.3
H 28,5 ± 0.5
H1 0,3 (REF)
Dimensions (mm)
Specification for Sealed Rechargeable Nickel Metal Hydride Battery
EMMERICH NIMH AKKU 2/3 AA 600 MAH FT-1Z (255020)
H
H
1
D
C
Charge: 60mA x 16hrs at 20deg.C
Charge: 60mA x 16hrs at 20deg.C
300mA
(0.5C)
120mA
(0.2C)
60mA
(0.1C)
1800mA
(3C)
1200mA
(2C)
600mA
(1C)