Datasheet
Model:
Chemical System: Nickel Metal Hydride Ni-MH
Type AAA Consumer Use
Nominal Voltage Standard 1,2 V
Nominal Capacity Low Rate - 0.1C 750 mAh
Weight 12 g
Capacity Charge Discharge Minimum Typical
Low Rate - 0.1C 0.1C 0.2C 720 mAh 760 mAh
High Rate - 1C 0.1C 1C 634 mAh 660 mAh
Charging Standard Quick* Fast*
Minimum Charge 80 mA (0.1C) 80 mA (0.1C) 80 mA (0.1C)
Time Required (hrs) 16 hrs 16 hrs 16 hrs
Maximum Charge 150 mA (0.2C) 380 mA (0.5C) 750 mA (1C)
Time Required (hrs) < 8 hrs < 2.2 hrs < 66 min (or - Delta V)
Minimum Overcharge 75 mA (0.1C)
Maximum Overcharge 750 mA with cut-off control
Maximum Discharge Current Continuous 2,25 A
Momentary (1 second ) 7,5 A
Internal Impedance Typical at 1000Hz 35 milliohms at 50% Discharge
Temperature Storage for < 1 Month (deg.C) Storage for < 1 Year (deg.C)
Minimum -20 -10
Maximum 40 30
Discharge (deg.C) Charge (deg.C)
Minimum -20 -20
Maximum 50 40
Service Life Standard (IEC61951-2) upto 500 cycles (for reference)
Designations IEC 61951-2
*
Quick and Fast charge require cut-off control circuitry to terminate charge or switch to trickle charge when cell reaches full charge
Remark: The information contained herein is presented only as a guide for the applications of our products
Data in this specification are subjected to change without notice and become contractual only
after written confirmation by Emmerich. D 10,0 ± 0.5
C 3,8 ± 0.3
H 44,0 ± 0.5
H1 1,5
(REF)
Specification for Sealed Rechargeable Nickel Metal Hydride Battery
Dimensions (mm)
EMMERICH NIMH AKKU AAA 800 MAH HIGHTOP (255013)
H
H
1
D
C
Charge: 75mA x 16hrs at 20deg.C
Charge: 75mA x 16hrs at 20deg.C
375mA
(0.5C)
150mA
(0.2C)
75mA
(0.1C)
2250mA
(3C)
1500mA
(2C)
750mA
(1C)

