Datasheet

Model:
Chemical System: Nickel Metal Hydride Ni-MH
Type 1/3AAA
Flat Top
Nominal Voltage Standard
1,2 V
Nominal Capacity Low Rate - 0.1C
160 mAh
Weight
3,7 g
Capacity Charge Discharge Minimum Typical
Low Rate - 0.1C
0.1C 0.2C 160 mAh 170 mAh
High Rate - 1C
0.1C 1C 141 mAh 150 mAh
Charging Standard Quick* Fast*
Minimum Charge
20 mA (0.1C) 20 mA (0.1C) 20 mA (0.1C)
Time Required (hrs)
16 hrs 16 hrs 16 hrs
Maximum Charge
30 mA (0.2C) 80 mA (0.5C) 160 mA (1C)
Time Required (hrs)
< 8 hrs < 2.2 hrs < 66 min (or - Delta V)
Minimum Overcharge
16 mA (0.1C)
Maximum Overcharge
320 mA with cut-off control
Maximum Discharge Current Continuous
0,48 A
Momentary (1 second )
1,6 A
Internal Impedance Typical at 1000Hz
180 milliohms upon fully charged
Temperature Storage for < 1 Month (deg.C) Storage for < 1 Year (deg.C)
Minimum
-20 -10
Maximum
40 30
Discharge (deg.C) Charge (deg.C)
Minimum
-20 0
Maximum
50 45
Service Life Standard (IEC61951-2)
upto 500 cycles (for reference)
Designations IEC 61951-2
*
Quick and Fast charge require cut-off control circuitry to terminate charge or switch to trickle charge when cell reaches full charge
Remark: The information contained herein is presented only as a guide for the applications of our products
Data in this specification are subjected to change without notice and become contractual only
after written confirmation by Emmerich.
D 10,0 ± 0.5
C 4,7 ± 0.3
H 14,5 ± 0.5
H1 0,3 (REF)
Dimensions (mm)
Specification for Sealed Rechargeable Nickel Metal Hydride Battery
EMMERICH NIMH AKKU 1/3 AAA 160 MAH FT-1Z (255007)
H
H
1
D
C