High Technology Low Cost 0801_GB_99 Instructions for installation, use e maintenance ELECTRIC KITCHENS M62P · M64P · M62V · M64V M74P · M74PQ · M76P · M72V · M74V M74PFXE · M74PQFXE · M76PFXE M74VFXE 03/2007
CHARACTERISTICS Supplied by: Date: Customer Service: FAX e-mail 0801_GB_99 - ELECTRIC KITCHENS 03/2007 2 · 20
INDEX 1 Diagram 4 2 Characteristics of the appliances 7 3 Technical data 7 4 Installation instructions 4.1 Safety rules 4.2 Structure, framework and safety devices of the appliances 4.2.1 Oven Electric version GN 1/1 ventilated 4.3 Assembly 4.3.1 Installation premises 4.3.2 Statutory regulations and technical requirements 4.3.3 Installation 4.3.4 Electrical connection 4.3.5 Equipotential 8 8 8 8 8 8 8 8 8 8 9 5 Operation preparation 5.1 Preparation and Start-up 5.1.1 Start-up 5.1.
1 - DIAGRAM M64P M62P 600 600 103 315 79 27 27 315 346 69 50 27 Electric power 430 535 86 30 546 Electric power 240.8 Electric power Electric power 27 60 400 Data plate 176.5 79 1.5 kW 600 2.0 kW 2.0 kW 245 2.0 kW 1.5 kW 178.5 600 1.5 kW 200 400 200 400 Data plate M76P Data plate M74P - M74PQ 800 700 60 1000 Electric power 150 690 678 Electric power 79 45 710 79 300 300 276.5 178.5 178.5 200 200 2.0 kW 2.
1 - DIAGRAM M76PFXE M74PFXE - M74PQFXE 800 700 60 1000 Electric power 150 690 678 Electric power 79 45 710 79 300 300 276.5 178.5 178.5 200 2.0 kW 2.0 kW 200 200 400 200 800 1000 178.5 2.0 kW 2.0 kW 700 2.0 kW 79 Electric power 276.5 2.0 kW 2.0 kW 245 2.0 kW 700 2.0 kW 245 2.0 kW 55 Data plate 79 Electric power 276.5 Electric power 545 45 2.6 kW 2.6 kW 2.6 kW 2.
1 - DIAGRAM M64V M62V 600 400 60 600 Electric power 103 240.
2 - CHARACTERISTICS OF THE APPLIANCES These appliances are used for professional purposes. Installation, repair and use must be carried out by expert personnel. The data plate is located on the appliance and contains all the data needed for installation. Beware of inexpert handling.
4 - INSTALLATION INSTRUCTIONS 4.1 Safety rules 4.3 Assembly • Only a local gas utility technician is authorized to carry out gas installations and connections. The statutory regulations (applied in Germany VDE, Austria ÖVE, Switzerland SEV, etc.) and connection conditions performed by the gas utility must be strictly observed.
4 - INSTALLATION INSTRUCTIONS 4.3.5 Equipotential The appliance must be hooked up to a unipotential system.The required terminal is located near the power cable and it is marked by a tag with a symbol . The manufacturers cannot be held responsible for any damage due to inadequate or incorrect installation. Under such circumstances the guarantee will be considered null and void. 5 - SET-UP FOR OPERATION 5.1 Preparation and Start-up 5.3.
6 - INSTRUCTIONS FOR USE 6.1 Safety, cleaning and repair rules Fig. 1 • This appliance is used for the preparation of meals at industrial level. Usage and cleaning can be carried only by expert personnel. Maintenance and repair can be carried out only by skilled technical personnel. • These indications must be communicated to all those concerned during internal training. • Attention! This appliance must be constantly watched over when being used! • Grease and overheated oil can catch fire.
6 - INSTRUCTIONS FOR USE 6.3 Lighting and shutdown of electric oven GN 1/1 With knob (pos. 1 fig. 2A) turn the thermostat from the “0” position to a desired temperature between 50°C and 300°C; the indicator light will come on; the green one (pos. 2 fig. 2A) shows that the appliance is on, the yellow one (pos. 3 fig. 2A) indicates that the resistances are operational, as soon as the set-up temperature is reached, the indicator light goes off. To turn the appliance off, turn the knob to position “0”. 6.
6 - INSTRUCTIONS FOR USE 6.6.3 The 2002/96/EC (WEEE) Directive: information to users Fig. A This informational note is meant only for owners of equipment marked with the symbol shown in fig. A on the adhesive label featuring the technical specifications applied on the actual product (the label also giving the serial number).
7 - APPENDIX: ELECTRICAL DIAGRAMS M62P M62V M72V - 1xR1 + 1xR2 1xR3 + 1xR4 1xR1 + 1xR2 400V 3N Position plates B1 plate rear B2 plate front 230V 3 1200 w 6 2300 w 6 5 700 w 5 1200 w 5 4 340 w 4 600 w 4 300 w 3 340 w 3 600 w 3 2 220 w 2 170 w 2 300 w 2 1 175 w 1 125 w 1 230 w 1 6 2000 w 6 1150 w 5 1150 w 850 w 4 850 w 300 w 3 220 w 135 w 5 2 1 3 3 4 P3 P1 P2 0 0 0 0 mA B1 B2 H1 R1 R2 R3 R4 R4 R3 R2 R1 1500 w 5 2 1 3 3 4 5 2 1 3 3 4 P3 P1 P3
7 - APPENDIX: ELECTRICAL DIAGRAMS M64P M64V M74P M74V - 2xR1 + 2xR2 2xR3 + 1xR4 + 1xR5 4xR2 2xR3 + 1xR4 + 1xR5 R... R... 1 2 4 3 2 1 3 4 1 2 4 3 2 1 3 4 R... R...
7 - APPENDIX: ELECTRICAL DIAGRAMS M74PFXE M74VFXE - 4xR1 + 1xR6 2xR3 + 1xR4 + 1xR5 + 1xR6 R... R... 1 2 4 3 2 1 3 4 1 2 4 3 2 1 3 4 R... R...
7 - APPENDIX: ELECTRICAL DIAGRAMS M76P - 6xR1 R1 R1 1 2 4 3 2 1 3 4 1 2 4 3 2 1 3 4 R1 R1 R1 1 2 4 3 2 1 3 4 1 2 4 3 2 1 3 4 R1 1 2 4 3 2 1 3 4 1 2 4 3 2 1 3 4 H1 5 5 B1 B2 P3 P1 P2 5 B3 P3 P1 P2 5 P3 P1 P2 5 P3 P1 P2 B6 P1 P3 Position plates B1 plate rear left B2 plate front left B3 plate rear central B4 plate front central B5 plate rear right B6 plate front right 5 B5 B4 P2 B1 P3 B2 B2 B3 B4 B4 B5 B5 B6 B6 1 2 3 4 L1 L2 L3 mA 1 2 3
7 - APPENDIX: ELECTRICAL DIAGRAMS M76PFXE - 6xR1 + 1xR6 R1 R1 1 2 4 3 2 1 3 4 1 2 4 3 2 1 3 4 R1 1 2 4 3 2 1 3 4 R1 R1 1 2 4 3 2 1 3 4 R1 1 2 4 3 2 1 3 4 1 2 4 3 2 1 3 4 H1 5 5 B1 B2 P3 P1 P2 5 5 B3 P3 P1 P2 5 P3 P1 P2 P3 P1 B6 P3 P2 P1 P2 1 2 4 L1 L2 L3 N 5 6 PE 400V 3N B1 plate rear left B2 plate front left B3 plate rear central B4 plate front central B5 plate rear right B6 plate front right R6 12 Position plates 3 P2 F1 P1 P2 2 P1 MV
7 - APPENDIX: ELECTRICAL DIAGRAMS M74PQ - 4xR1 R1 R1 1 2 4 3 2 1 3 4 R1 1 2 4 3 2 1 3 4 R1 1 2 4 3 2 1 3 4 1 2 4 3 2 1 3 4 P1 P2 H1 5 B1 5 B2 P3 P1 P2 5 P3 P1 P2 B4 P3 P1 P2 Position plates 400V 3N mA 1 2 3 4 L1 L2 L3 N 5 6 PE 5 B3 B1 plate rear left B2 plate front left B3 plate rear right B4 plate front right P3 B1 B1 B2 B2 B3 B3 B4 B4 mA 1 2 3 L1 L2 L3 4 5 6 PE 230V 3 R1 2600 w 6 1800 w 5 1200 w 4 600 w 3 400 w 2 270 w 1 0 B1 5
7 - APPENDIX: ELECTRICAL DIAGRAMS M74PQFXE - 4xR1 + 1xR6 R1 R1 1 2 4 3 2 1 3 4 R1 1 2 4 3 2 1 3 4 R1 1 2 4 3 2 1 3 4 1 2 4 3 2 1 3 4 P1 P2 H1 5 B1 5 5 B2 P3 P1 P2 5 B3 P3 P1 P2 B4 P3 P1 P2 H2 H1 1 2 P3 MV 11 A1 P1 P2 12 Position plates mA 1 2 3 4 5 L1 L2 L3 N 6 PE R6 F1 B1 B1 plate rear left B2 plate front left B3 plate rear right B4 plate front right A1 A1 B2 B2 B1 B3 B3 B4 B4 mA 1 2 3 4 5 6 400V 3N L1 L2 L3 PE 230V 3 R1 mA B1 B2
WARNING THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY INACCURACIES IN THIS BOOKLET DUE TO COPYING OR PRINTING ERRORS. DUE TO ITS POLICY OF CONTINUAL PRODUCT IMPROVEMENT, THE MANUFACTURER RESERVES THE RIGHT TO MAKE ANY CHANGES DEEMED NECESSARY. THE MANUFACTURER CANNOT BE HELD RESPONSIBLE IF THE INSTRUCTIONS CONTAINED IN THIS MANUAL ARE NOT OBSERVED. GIGA Grandi Cucine S.r.l. - Via Pisana, 336 - 50018 Loc. Olmo di Scandicci (FI) - Italy Tel. +39 055 722 33 (11 linee r.a.) - Fax +39 055 7310056 www.
