Specifications

016

Appendix A - Serial Remote Control (RS232)

XDS1 CD/SACD PLAYER OWNER’S MANUAL

Serial Remote Control (RS232)

e XDS1 is equipped with a 9-pin RS232 port for system remote control via a serial cable

(not provided by EMM Labs). Please use a standard RS232 cable. Do not use a null model

cable, as this will not work. RS232 communication port settings:

• 19,200 baud

• 8 bits

• 1 stop bit

• no ow control

• no parity bit

Commands to the XDS1

All commands sent to the XDS1 consist of 3 ASCII characters (all lowercase) followed by a

carraige return or <CR>. Repeating a <CR> will repeat the last command sent. Received

commands are not stored in a stack. ey need to be sent in intervals of at least 50ms to

allow enough time for the XDS1 to execute a command before receiving the next one.

Command Function

ply Start Playback

pse Pause Playback

stp Stop Playback

mod Toggles through the SACD playback layers. Only works when not playing.

rpt Toggles through the dierent repeat modes

nxt Jumps ahead a track

prv Jumps back a track