Specifications
014
Infrared Remote Control
XDS1 CD/SACD PLAYER OWNER’S MANUAL
© 2012 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
Infrared Remote Control
DISC : is function toggles the front panel display to dierent preset
brightness settings including turning the display o.
INPUT : Toggles between CD/SACD playback, AES and TOSLINK PCM
inputs.
Numeric Buttons : ese buttons can be used to directly access any track on the CD
or SACD directly. To access tracks higher then 9 see examples:
• Track 10 press and hold 1 until you see the display change
to 10 then press 0.
• Track 23 press and hold 2 until you see the display change
to 20 then press 3.
MODE : To switch between the SACD and CD layers of a hybrid SACD.
Works only when the drive is in stop mode.
REPEAT : is buttons toggles through 3 states:
• Repeat Track – repeats current track
• Repeat All – repeats entire disc
• Repeat Off - turns repeat function off
PLAY : Starts or Pauses Playback
PAUSE : Pauses or Starts Playback from Pause.
STOP : Stops Playback. Pressing stop a second time or when the drive is
already in stop mode ejects the tray.
|<< : Jumps back a track. Press and hold to enter fast rewind mode. In
this mode pressing the button immediatly a second and third
time causes the rewind speed to increase. To exit press PLAY.
AES
PAUSE
INPUT
DISPLAY
DISC
DISC
1
4
7
PLAY
MODE
TOS
2
3
5 6
8 9
0
STOP
REPEAT
TRACK
PHASE
MUTE