User guide

4. Hints and Tips

• Selecting another input (A to D), or reselecting the current input again,

immediately puts the system into Volume Control Mode, thus escaping any other

mode the system is currently in.

• When inspecting settings of a given channel, you may choose to adjust that

channel right away. Press the TRIM button at this point - the channel selection

stays the same, but now the system is in Channel Trim Mode.

• The RESET (red) button on the back of the Remote Unit restarts the Remote

only; however, the system returns to Volume Control mode at this point.

• The Remote Unit can be unplugged and plugged-in at any time. You may use this

as a sure-fire variant of System Lock feature.

Set up and adjust your system, then disconnect and hide away the Remote.

When the Remote is re-connected again, the display and LED indicators shall

update immediately. Pressing the RESET button on the back of the Remote

ensures that both units are synchronized.

• If you save the current settings (in a template of your choice,) your system set-

up survives power-down/power-up events.