Specifications
023
Appendix A - PRE2 Serial Remote Control (RS232)
© 2014 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
PRE2 STEREO PREAMPLIFIER OWNER’S MANUAL
PRE2 Serial Remote Control (RS232)
RS232 Port Set-up
e RS232 Control port in PRE2 is set up as follows:
• Baud rate 9600bps
• Character length 8 bits
• Stop Bits 1
• Parity none
Product Class Denitions
• Disc Transport : "CD"
• SACD Player : "SC"
• Blu-ray Player : "BD"
• Preamplier : "PR"
• DAC : "DA"
• Media Player : - to be dened -
• Signal Processor : - to be dened -
• Power Amplier : - to be dened -
Note: SACD or Blu-ray players can accept generic disc transport commands ("CD"), and, in addition, their product-specic
commands. e command set for a SACD player, for example, should support the Program and Layer Selections.