Specifications

015
Operational Features
PRE2 STEREO PREAMPLIFIER OWNER’S MANUAL
Programming Menu
2. Input Naming Menu (contd)
• DASH, PERIOD, and SLASH characters
• digits 0-9.
Rotating the Volume knob scrolls through the characters. Pressing one of Input Selector buttons shows the current name
of the input, and allows the name to be edited. e name being edited is stored only by pressing the ‘SAVE’ button on this
screen. Pressing another input button or selecting a dierent/same input discards the changes. Pressing the ‘Quit’ button
returns you to the ‘Programming Menu’ page, discarding any changes made.
3. Volume Display Units
e screen shows a sample value of the Volume display.
e ‘Change Units’ so button toggles the Volume
display units to the following two options:
• Volume Step
• Gain in [dB]
e Volume knob is active and you can change the
sample value. e actual Volume (signal gain) is not
aected. e Volume display unit selected is stored only
by pressing the ‘SAVE’ button. Upon ‘EXIT’ aer ‘SAVE’
the main screen will display the selected Volume display
unit. Pressing ‘EXIT’ without pressing ‘SAVE’ discards any changes.
© 2014 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.