Manual

DCC2 User Manual
EMM OptiLink
This EMM Labs proprietary link is used for the best performance with a EMM Labs
transport system. The cables used are standard ST glass (multimode). The link consists
of 2 connections, one for data and one for clock. If the DCC2 is operated in clock master
mode a third connection is necessary, which can be established with a ST glass optical
cable as well to maintain the galvanic separation between transport and DCC2.
Cable connections:
AES/EBU INPUTS WORD CLOCK I/O
IN IN
OUT OUT
DSD INPUTS
S/PDIF INPUTS
COAX
21
TOS ST BNCLR
PUSHPUSH
OPTICAL
CLOCK
OUT
OPTICAL
CLOCK
IN
ST OPTICAL
DATA OUT
DCC2 Digital Input Connectors
CD/SACD Transport or other Source
DCC2
CD
Deck
3 Optical cables
with ST connectors
Front panel setup:
NARROW
WIDE
INVERTED
48 KHZ
44.1 KHZ
LOCK CLOCK
COAX TOS STSTBNCRCA
XLR
INPUT SELECT
AES
PCMDSDANLG
ANALOG OUTPUTCLOCK CONTROL
DIGITAL BWBASE FS
MUTE
POLARITY
EXT
Set this option for clock slave mode !
9