User Manual

Installing Communication Settings by Default
For cards with version V01;
1- Power off the I/O Module device.
2- Lift the cover of the device.
3- Short circuit pins 2 and 4 on the socket shown in the picture.
4- Wait for at least 2 seconds by energizing. After 2 seconds, the communication settings will return to
default.
5- Remove the short circuit.
6- Close the device cover.
For cards with version V02;
1- Power off the I/O Module device.
2- Lift the cover of the device.
3- Put a jumper on the socket shown in the picture.
4- Wait for at least 2 seconds by energizing. After 2 seconds, the communication settings will return to
default.
5- Remove the jumper.
6- Close the device cover.
18 EN PROOP-IO 02 V08_1221
V01
V02