Instructions

1.2 Ordering Information
6
EzM-9930 ( 96x96 1/4 DIN)
A BC D E FG HI /
/
U V W Z/
/
All order information of EZM-9930
Programmable Counter are given on the
table at left. User may form appropriate
device configuration from information and
codes that at the table and convert it to the
ordering codes.
Supply voltage must be determined
for your system.
Please fill the order code blanks
according to your needs.
Please contact us, if your needs are
out of the standards.
100 0 0
Supply VoltageA
c
0 0 0
00 00
Output-1E
Relay Output (5A @ 250 V V) Rezistive Load
1
1.3 Warranty
EMKO Elektronik warrants that the equipment delivered is free from defects in material and
workmanship. This warranty is provided for a period of two years. The warranty period starts from
the delivery date. This warranty is in force if duty and responsibilities which are determined in
warranty document and instruction manual performs by the customer completely.
1.4 Maintenance
Repairs should only be performed by trained and specialized personnel. Cut power to the device
before accessing internal parts.
Do not clean the case with hydrocarbon-based solvents (Petrol, Trichlorethylene etc.). Use of
these solvents can reduce the mechanical reliability of the device. Use a cloth dampened in ethyl
alcohol or water to clean the external plastic case.
V Symbol means Vac
Z Symbol means Vdc
W Symbol means Vac and Vdc
can be applied.
24 V V (-%15;+%10) 50/60Hz
115 V V (-%15;+%10) 50/60Hz
3
4
Customer (Maximum 240V V (-%15;+%10))50/60Hz
9
230V V (-%15;+%10) 50/60Hz
5
24 V V (-%15;+%10) 50/60Hz or 24 VZ (-%15;+%10)
2