Instructions

6. Failure Messages in EZM-9930 Programmable Counter
46
Operation
Screen
Password Screen
No digit flashes
Reset Offset Parameter
1-If the password is not 0, user can access to the parameters without entering the password
and by pressing ENTER button.
User can see all parameters except for programming password parameter but user
can not do any changes in parameters. If password is entered for accessing to the parameters
correctly, most significant digit of the parameter flashes. But if the password is not entered,
flashing of the most significant digit is not realised.
S1
SV
O1
OP
S1
SV
O1
OP
S1
SV
O1
OP
S1
SV
O1
OP
RESET
P
SET
RESET
P
SET
RESET
P
SET
RESET
P
SET
When PROG button is pressed,
password entering screen will
appear.
Press ENTER
button without
entering the
password.
The most
significant digit
of the parameter
(4th digit for this
parameter)
flashes.
Input Types
and Functions
By pressing ENTER
button, user can see all
parameters except for
program password
Press PROG button to exit
from programming mode.
Continue to press ENTER
button for scanning the
parameters.