Instructions

43
0
Set
Reset
Output
Or
0
Set
Reset
Output
Or
Automatic Reset-5
is not considered.
If count value is equal or less than value, then output
becomes active. If count value greater than v a l u e , t h e n
output becomes inactive. Output Pulse time is not
considered.
When Manual Reset happens; if , then count
value becomes SETvalue, if , then count value
becomes Reset Offset value.
If count value equal or greater than SET value, then output becomes
active. If count value less than SET value, then output becomes inactive.
is not considered. Counting process continues over the Set
value.
When Manual Reset happens, count value becomes Reset Offset
value.
Counting direction : 0 --> P (Upcounting)
=
Counting direction : P --> 0 (Downcounting)
=
i
=
=
=
=
Reset Offset
Reset Offset
=
=
It is preferred if upcount and downcount is performed at the same time.