Instructions

38
Counting direction : P --> 0 (Downcounting)
=
0
Set
Reset
Output
0
Set
Reset
Output
=
=
Reset Offset
Reset Offset
=
=
When count value reaches the 0 Value, Output Position is changed. If
Output Pulse time is not 0, then Output Position is changed
the old position at the end of the Pulse time. Actual value is reset and
counting starts from SET value at the end of the Output Pulse time.
If output pulse time , then output position has not
change until Manual Reset happens. Actual counting value stops at SET
value. Counting process is not continue under the 0 value.
When Manual Reset happens, if , then count
value becomes SET value. If , t h e n c o u n t
value becomes Reset Offset value.
=
i
If output functions parameter is selected Automatic Reset (
, or , then must be different from zero
for realizing Automatic Reset.