Instructions

34
Manual Reset-2.
(Output pulse Time is not considered)
Counting direction : 0 --> P (Upcounting)
=
0
Set
Reset
Output
When count value reaches the Set Value, Output Position is changed.
Counting process is not continue over the SET value. Output Pulse Time
is not considered. Process counts, until manual reset happens. When
Manual Reset happens, count value becomes Reset Offset value.
Counting direction : P --> 0 (Downcounting)
=
0
Reset Offset
Reset
Output
=
=
Or
=
=
Or
Set
Reset Offset
When count value reaches the 0, Output Position is changed.
Counting process is not continue under the 0 value. Output Pulse Time
is not considered. Process counts, until manual reset happens. When
Manual Reset happens; if , then count value
becomes SET value, if , then count value
becomes Reset Offset value.
=
=