Instructions

33
Manual Reset-1.
Device continues to count till manual reset is applied.
(Output PulseTime is not considered)
Output Functions
Count direction : 0 --> P (Upcounting)
0
Output
Set
Reset
=
Counting direction : P --> 0 (Downcounting)
0
Reset Offset
Reset
Output
=
When count value reaches the 0, Output Position is changed.
Counting process continues under the 0 value. Output Pulse Time is not
considered. Process counts, until manual reset happens. When Manual
Reset happens; if count value becomes
SET value, if then count value becomes
Reset Offset value.
When count value reaches the Set Value, Output Position is changed.
Counting process continues over the SET value. Output Pulse Time is
not considered. Process counts, until manual reset happens. When
Manual Reset happens, count value becomes Reset Offset value.
=
=
Or
=
=
Or
Set
Reset Offset
=
=