Instructions

32
Direction of Counting
Upcount. ( 0 --> Preset )
Downcount. ( Preset --> 0 )
Input types and Functions parameter is or
then Direction of Counting parameter can not be accessed.
i
If Input types and Functions parameter; is entered , or
then, pulse time for Ch-A and Ch-B Input parameter
can not be accessed
Filter time for Ch-A and Ch-B Inputs
It is used to protect against the electrical contact debounce or the signal
that is less than the determined pulse time.
It can be adjusted from to milisecond.
i
Filter time for Reset and Pause Inputs
It is used to protect against the electrical contact debounce or the signal
that is less than the determined pulse time.
It can be adjusted from to milisecond.
Sensor Type Selection
NPN type sensor selected
PNP type sensor selected