Instructions

4.4 Resetting the Count Value
When RESET button is pressed, Actual Value
becomes the Reset-Offset Value.
Operation
Screen
Operation
Screen
23
i
RESET operation can be realized by Reset button or applying signal to the
RESET input. These two operations are named MANUAL RESET in parameters
section.
At the end of MANUAL RESET operation, if then Count
Value becomes Reset Offset Value.
If and then Count Value becomes
SET value. If and then count
value becomes Reset Offset Value.
S1
SV
O1
OP
S1
SV
O1
OP
=
=
=
=
RESET
P
SET
RESET
P
SET
=