Instructions

4. Electrical Wiring Diagram
5
3- Insert the mounting clamps to the fixing sockets
that located left and right sides of device and make
the unit completely immobile within the panel
1-Pull mounting clamps from left and right fixing
sockets.
2-Pull the unit through the front side of the panel
Before starting to remove the unit from
panel, power off the unit and the related
system.
c
2.3 Panel Mounting
2.4 Removing from the Panel
Relay Output
21 4 5 7 8
P/N : EZM-3735
L
N
a
Pause
Digital Input
230V ( %15) 50/60Hz
115V ( %15) 50/60Hz
24V ( %15) 50/60Hz
Z
V ±
V ±
V ±
10..30 V
Must be determined in order.
3 6
Supply Voltage Input
3
1
3
2
3
2
1
Note-1 : For 230VV , 115VV or 24VV power supply; 4 is “L”, input 5 is “N”, for
10...30VZ power supply; input 4 is “-”, input 5 is “+”.
input
1-Before mounting the device in your panel,
make sure that the cut-out is of the right size.
2-Insert the device through the cut-out. If the
mounting clamps are on the unit, put out them
before inserting the unit to the panel.